Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of
 hplc vials with micro insert for sale.jpg)
Sample vials may also be sterile or pre-cleaned for conformity to various certification and compliance requirements. Glass sample vials made from Type 1 Class A borosilicate glass have low extractables and superior chemical resistance, others made from soda lime glass are for less demanding applications. Plastic sample vials are manufactured
2 Dram (7 ml) Amber Glass Vials (Cap Not Included) - 4445B36-B 0.3 Dram (1.2 ml) Amber Glass Screw Top Vials - YSSASH (Quantity: 144) 0.3 Dram (1.2 ml) Amber Glass Screw Top Vials (Sample) - YSSASH-SAM 0.5 Dram (2 ml) Amber Glass Vials - YA116 (Quantity: 144) 0.5 Dram (2 ml) Clear Glass Screw Top Vials - YC116 (Quantity: 144) 0.63 Dram (2.3 ml) Amber Glass Screw Top Vials - YASH (Quantity: 144
Products : Vials : Sample Vials SAMPLE VIALS. Sample Vials are manufactured from Type 1 borosilicate glass, available in clear or amber. Custom Vial Manufacturing is also available.
Chromatography Direct Vials and Inserts could save you over 40% when comparing the market leader to the Chromatography Direct equivalent. By purchasing your Vial sand Insert separately you too could make huge savings. The insert and vial are manufactured together and are 100% compatible.
All Micro+™ vials have a 300 µl or 900 µl tapered glass insert fused top and bottom into a standard 12×32 mm vial, which means that analysts no longer have to assemble a number of small components before they can start to work. The insert is now an integral part of the vial, thus reducing the chance of the needle being damaged.
Certified glass inserts for 12 x 32 mm, large opening vials volume 0.2 mL, clear glass insert (with plastic bottom spring), O.D. × H 6 mm × 29 mm, pkg of 100 ea pricing 29436-U
Choose clear glass for maximum visibility or, for UV protection, cobalt blue, green or amber glass sample vials. A wide selection of caps is available attached or purchased separately. Choose from our standard screw thread glass sample vials or the wider mouth short compound vials.
Glass Vials. Find a large assortment of glass vials, with a variety of color and closure options. Available in clear, amber, green, and blue, these glass vials have a variety of commercial and personal uses. Dropper options include the plastic dripper insert or the black bulb dropper. All prices include applicable cap or closure.
Sample Vials 250ul Micro Volume Insert Plastic Cone Bottom For 9-425 Standard 2ml Lab HPLC Sample Vials. US $9.03 - $9.03 / Pack
Glass Vials, Inc. Glass Sample Vials with Caps Capacity 15mL Test Tubes, Vials, Caps and Closures:Vials:Sample Vials:General Sample Vials
Limited volume inserts are available in a variety of designs to accommodate all size vials and all types of autosamplers. Polymer Top Springs™, bottom springs and metal springs act as shock absorbers that protect against breakage if the needle “bottoms out”.
The vials are offered in a variety of closure systems, including flip-top caps, snap caps, screw caps, plug-style caps, and crimped caps, and may be autoclavable for applications requiring sterilization. Types of plastic and glass sample vials include autosampler vials and Environmental Protection Agency (EPA) vials. A sample vial is used to
Micro Packaging Vials are skirted with conical interiors to allow recovery of entire contents. Both vials and closures are pressure-tested together for air shipment and meet the requirements of FDA CFR21 177.1520 for food and beverage use, USP Class VI and are non-pyrogenic.
Glass vials are the perfect container solution for health and beauty products, essential oils, medicines and laboratory use. We stock everything from tiny glass vials in 1 dram sizes to larger 6 dram round glass vials, each with a variety of neck sizes and finishes suitable for your manufacturing needs.
