Free sample micro insert with mandrel interior and polymer feet for lab use USA Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm Capacity: 150-250uL Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1 pack
There have three types of HPLC Micro Insert suitable for 9-425 hplc vials, I300, 300uL Micro-Insert with Flat Bottom, IV250 250uL Conical Micro-Insert, IP250-I 250uL Micro insert with Mandrel Interior & Polymer Feet.
Chromatography Vials, Caps & Septa - AijirenA comprehensive portfolio of chromatography vials including vial caps and vial septa for protecting and storing your GC & HPLC samples. Whatsapp:+8618057059123
A new piston skirt coating was introduced to reduce friction; Data: 05.05.2022 15:13; Oil jets were added to the timing chain drive; A low-pressure EGR circuit was introduced to increase the EGR rate, while the high-pressure EGR circuit was ‘optimised’; Autor: R.Zybura,kor.
Aijiren micro insert with mandrel interior and polymer feet Discounting hplc autosampler vials Aijiren-Analytical Testing Aijiren hplc sample vials for sale supplier- Aijir Tel: +8618057059123 Email:market@aijirenvial.com
May 02, 2022 · High Quality Insert Bearing. Thebearing insert with set screw locking is held in position on the shaft by two set screws directly on the extended end of the inner ring. UC Solid Base Pillow Block Bearing 1/2" Bore Self Aligning 2 Bolt. New New New. $12.53. Free shipping Free shipping Free shipping. ... CBN Insert Industrial Indexable ...
18-Q4-Brochure - Read online for free.
Certified 9mm hplc vials with ptfe liner pp cap for Aijiren SureStop Vials and AVCS Caps | Thermo Fisher 9mm AVCS Magnetic Open Screw Top Cap, 6mm hole C5000-46M Blue Polypropylene Soft septum, PTFE/Blue Silicone 30 1.0 100 C5000-47M Blue Polypropylene Soft septum, PTFE/Blue Silicone, Pre-slit 30 1.0 100 9-MSC(BG)-ST1 Blue/Gold PP/Steel 30
V913: 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type
Micro inserts can be used with screw tops, crimp tops, or snap top vials. All conical styles of inserts are offered with the traditional pulled point as well as the improved mandrel point. Pulled point inserts are more economical, but mandrel point inserts provide a more pointed and uniform tip that enables better sample recovery. Micro-Inserts
.jpg)
The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom.
Micro Insert with Mandrel Interior & Polymer Feet Volume: 150ul, 250ul Suit for 2ml screw neck vials and 2ml crimp neck vials
V913: 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type
Brand new micro insert with mandrel interior and polymer feet for 1.5ml vials Autosampler Vial Inserts for ND11 Vial Micro-Inserts & Shell Vials & Racks &Crimper 100pcs/pack150ul Insert with mandrel interior and polymer feet, 29*5mm; suits for ND8 Vials 250ul Insert with mandrel interior and polymer feet, 29*5.7mm; suits for ND9 Vials 200ul Micro-Insert,31*5mm,clear glass
Home » News » lab vials » polymer feet micro insert with filling lines polymer feet micro insert with filling lines Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack
